COLD ROOM EVAPORATORS

YK/EA Series Cold Room Evaporators

APPLICATION

Our cold room evaporators have a capacity range of 0.9-56 kW and can respond to small and medium cooling requests. The batteries included in the units are highly thermal efficient and are also compactly designed. For higher capacity requirements, our production is available and special designs are done.

BATTERY PROPERTIES

The material and shape properties used in the production of cold room evaporators in our company can be listed as follows:

Copper Pipe : 01/2" (glycol 05/8") copper pipe Fin : High efficiency surface unduladed fins
Pitch : 4,2-6,0-8,0-10,0 (Regarding request 12,0 mm) wide pitch options.
Testing : After the evaporators are installed, a leak test at 22-26 bar pressure is applied and pressurized with nitrogen.

BODY

Against rusting, electrostatic white painted, galvanized steel body, as well as the strength of the body exhibited a decorative feature. However, side covers and drainage pan are designed to be easily removable for installation and maintenance work. (It can be produced from stainless material on special request)

YK/EK Series Quick Freezing Evaporators

Fast freezing evaporators are used for cooling and freezing of meat, fish and bakery products. Fast freezing provides keeping products very quickly, fresher, longer-lasting time.

  • Quick freezing evaporators are designed in 4 different series, H, S, T and K.
  • 5/8” O.D. seamless copper pipe and 10 mm pitch, wavy aluminum fins.
  • As a standard, electrostatic powder painted galvanized steel can be used for cassettes and on request stainless steel cassettes can be made.
  • R404 refrigerant gas has a capacity of 4.5 to 55 kW at -40 ° C evaporation and -35 ° C room temperature conditions.
  • Insulated and double-wall pan is used as standard.
  • Electrical defrost system: The battery, the fan, the drainage pan and the electrical defrost system used in the drainage line are easily evacuated

YK/EC-A and YK/EC-P Series Cold Room Evaporators

EC type coolers are low volume products that are designed to work in low volume cold rooms and cooling cabinets, room conditions below 0 ° C, ceiling mountable and not to cover large areas. Suitable for operation with refrigerants such as R404A, R22 and R134A, these refrigerants are used under SC2 conditions and with R404A; EC-A models 3,50 / 7,00mm hatched 215-897W, EC-A ... / D models 5,00 / 10,00mm hatched 181-786W; The EC-P models have a capacity range of 256-1320 W for 4.2 mm defects.

EC type refrigerators have aluminum lamellae, 3/8 "copper pipes, inlet-outlet copper connections.The cabinets of the products have aluminum in EC-A models and plastic materials in EC-P models.The cabinet material made of aluminum can be easily removed.This feature makes installation, maintenance and cleaning processes easily.

ELCO bran axial fans are used in EC type coolers. All of the fans are in the cabinet and the fan motor can be easily reached by it's design.

The stainless steel materials used in the products allow rapid and efficient defrosting.

 

YK / ED Series Cold Room Double Blown Evaporators

The ED Series double blown cold room evaporators are capable of responding to small and medium cooling demands. The batteries contained in the units are highly efficient in thermal maintenance and are designed to be compact and can be mounted on a ceiling at the same time. For higher capacity requirements, our production is available and specially designed.

Battery Properties

The material and shape properties used in the production of cold room evaporators manufactured in our company can be listed as follows.

Copper Pipe: 1/2" copper pipe
Fin: High efficiency surface undulated fins
Pitch: 4,2-7,0-10,0 mm wide pitch options
Testing: After the evaporators are installed, a leak test at 22-26 bar pressure is applied and pressurized with nitrogen.

Body

Against rusting, electrostatic white painted, galvanized steel body, as well as the strength of the body exhibited a decorative feature.The body can also be produced from stainless steel instead of galvanized steel. However, side covers and hinged drainage pan are designed to be easily removable for installation and maintenance work.

YK/EG Series Cold Room Corner Ceiling Type Evaporators

EG corner ceiling evaporators have a capacity range of 0.14 - 16.40 kW in SC2 conditions (Tevap inlet = -8 ° C, Troom = 0 ° C) with R404A refrigerant, have a capacity range of 0.24 - 23.36 kW in SC11 conditions (Tevap =-10° C, Troom = 0 ° C) with water-glycol mixture and it has small - medium cooling capacities and it can be applied in industrial cold storage rooms.

Products have 4.20, 6.00 and 8.00mm wide pitch options. The batteries included in the units are highly thermal efficient and are also compactly designed. The battery inside the EG corner-top coolers is covered with aluminum lamellaes, 3/8 "or 1/2" copper pipes, inlet-outlet copper connections, as well as cabinet electrostatic painted.

EBM brand or equivalent high efficiency axial fans and long lasting and high quality stainless steel resistanced materials are used in EG corner ceiling coolers.It has electrical equipment for the fans and resistors till to the terminal box. EG corner-type coolers have hinged drainage pan for installation and maintenance work, allowing easy cleaning and maintenance of the products.